Home Improvement Empire

The most popular Split Level house renovations are projects to finish unfinished or partly finished areas, opening up the main floor, updating the kitchen, adding bathrooms to the main (formal living area) floor and to the upper level (bedrooms area).

Many people want to create more openness in the main floor of a split level, which usually consists of living room, dining room, kitchen and possibly a bedroom. Openness can certainly be achieved by removing some of the walls between rooms. You will need to be sure you know which walls are load-bearing walls. For example, you might want more openness between the kitchen and the dining room. Either removing the wall or replacing the wall with a counter will open up the area and feel more spacious. Removing the wall between the living room and dining room can also open up the area and make it more conducive to entertaining.

It is not uncommon for split level homes with four levels to have an unfinished bottom level. Finishing this area is really no different from finishing any basement. It will be important, however, to check on ceiling height early in the planning stages of the project. A number of split level homes have lower ceilings on the bottom floor.

The desire to add a bathroom to any home is quite common. Split levels often offer two important opportunities for bathroom additions. First, most split level homes were not built with a bathroom on the main (formal living area) floor. Many homeowners would like to add at least a half-bath or powder room on the main floor for the comfort and convenience of guests or for elderly or disabled family members. Determining the location of the new bathroom is a challenge in most split levels. Logic and cost-consciousness would suggest locating the new bathroom near (next to, above or below) existing plumbing. This allows you to use existing supply and removal pipes. Depending on the floor plan, however, this might not be workable. Location of pipes to a new bathroom on the main floor will also require some attention to the ceiling height of the floor below (if there is one). If the lower level has typically lower ceilings, placement of plumbing might depend upon where you can run pipes without making the lower level unusable. You can get a quick estimate of the cost to finish a split-level homes basement at www.remodelestimates.com.

Adding a bathroom on the bedroom level is also a very popular renovation to a split level. Many split level homes have only a shared bathroom on this floor. Other designs include a very small master bathroom. Whether your remodeling plan involves adding a second bathroom or enlarging a master bathroom, it will be necessary to sacrifice space somewhere on that floor. Again, you will probably want to try to build the new bathroom close to existing plumbing, if possible to reduce the amount of work required and to control the cost of your renovation. Enlarging a master bathroom in a split level will almost certainly require taking space from the bedroom. One solution might be a bump out or add an addition that spans both the bathroom and the master bedroom. The key to success for remodeling projects is to be organized — try getting an organizer like the one at www.remodelingorganizer.com.

Although split level home designs present some unique challenges to remodelers, with a creative eye to design, careful planning, and attention to detail, most of the changes you might want to make are possible.

Copyright 2007 by ABCD Publishing

Turn off Water

If any pipes are leaking or broken, turn off the water immediately to prevent further leakage and damage. There should be a turn off handle behind the toilet, but if the leak is somewhere you may have to turn off the water for the whole house.

Remove Water

If there is any or a lot of water in the area, take the time to remove all of it before cleaning. Use towels, rags, a shop vac, or anything you can to make sure you get every bit.

Dry Items

Wipe down all walls, wood paneling, and any wood furniture in the room. Moist wood can mold and produce moisture quickly, causing a mold problem. It’s important to have every thing dried off in advance. After drying everything and removing all water, let everything dry off for a little while before beginning to clean.

Ventilate

Turn on the ceiling vent fan if you have one in the bathroom, and open any windows in or near the area as well. The more airflow, the better so also bring in any floor fans you have as well.

Launder Fabrics

Any towels, bath rugs, or any other launder-able item needs to dried and laundered immediately. Put on gloves and squeeze out any extra water.

Remove Debris

If there is any debris or dirt in the area, put on some gloves and boots and remove it as carefully and quickly as possible. Use industrial garbage bags and one-time use rags (You can get bags or boxes of industrial paper towels or rags at auto supplies stores for cheap) to clean and clear all the dirt away.

Sanitize

Make a basic mixture of bleach and water and go over all the walls, floors, and even ceiling with it. You can do this in parts (with all windows open!) because the smell will be strong, and the fumes aren’t really good for you.

Clean Normally

Once you’ve removed the debris and de-sanitized, you’ll have to wait awhile for the fumes to clear. Once this is done, get your regular bathroom cleaners and gloves and go through and clean like you would normally. Pay special attention to any wood paneling at the bottom of the sink and around anything touching the floor.

Check for Mold

With any water damage, there’s always a risk of mold. Once clean, go around the bathroom and check for signs of mold or structure damage. Feel the walls to make sure they aren’t soft, and look for any sort of discoloration. If you’re unsure, call in a water damage expert to take a look.

We’re currently living in a day and age where the ecology of our planet is becoming a very important issue in everyday life. The way we use and re-use our resources as well as how we manage our homes and lives in green culture provides us an opportunity to make choices in helping to promote a cleaner healthier planet. Part of those choices stem from using more energy efficient light bulbs. Recycling our plastics and paper. Even making choices about the furniture we purchase. In this article we’ll take a look at some things we can do to recycle and re-use our older furniture as well as some tips on eco-friendly furniture products.

When purchasing new furniture or beds we often need to think about the furniture being replaced as part of the circle in promoting good ecological habits. There are several options that we can use to recycle or re-use your old furniture.

1.) Consider donating your furniture. Businesses like the Salvation Army or Goodwill Industries puts your older furniture back into circulation for others to use. The proceeds they generate from your furniture in turn helps to provide jobs and allows your furniture to find new life with a new family.

2.) Recycle your furniture. Wood furniture “can” be recycled at your local recycling center. There are also many local authorities who can assist in helping you to safely dispose of your furniture for recycling.

3.) Offer it to your family or friends. Your older furniture may be in tip top shape and if that’s the case you may still have sentimental feelings towards it and want to keep it in the family. If that is the case you can offer it to those you know who may have a need for the furniture.

4.) Try selling it. Many times your furniture may hold good resale value if it is a name brand or high-end piece of furniture. If that is the case why not sell it in a local newspaper ad or try selling it through online auctions like ebay or other online marketplaces.

Many of the options above give the added benefit of the furniture being safely and responsibly recycled or re-used which is an important step before shopping for new furniture and creating good eco-friendly habits. We need to avoid having older furniture added to landfills and we should make every effort to find a safe means of recycling our older furniture. After you’ve made arrangements to have your older furniture recycled or re-used you’ll want to start looking at some alternatives available in eco-friendly materials for furniture. There are many options available in furniture but one such material is becoming quite popular in green furniture. It’s called bamboo.

Bamboo is an interesting ecological friendly choice for a wide variety of products. What makes this product considered a green choice in furniture though is the process through which it is harvested and replanted. Many believe bamboo is a type of wood but it actually is classified as a grass. From the time it is seeded to the time it reaches maturity for harvesting is approximately 5-7 years. The stalk of the bamboo hardens and becomes tighter (harder than maple wood) which is then harvested and processed into a variety of products including boards which can be used for building and construction. It can be reseeded once harvested in as little as three months and because bamboo grows so quickly often reaching heights of 70 feet tall, this replenishment is quick with little to no impact on the environment.

Many domestic hardwoods like oak or ash do make great choices for furniture. In this modern age of resource conscious ecological living though many of us recognize that once an oak or ash tree is harvested it takes almost 40-45 years for a new one to be planted and grown to maturity. Many lumber companies do act responsibly with their cutting and harvesting of those trees but the maturity. However, if alternatives exist (like bamboo) and can be used in certain types of furniture in place of other woods then we should consider those resources ahead of others. Bamboo beds, nightstands, dressers and bookcases are just some of the many pieces of furniture made from this plant. The bamboo plant is even used in making fabric which is used in many types of mattress coverings.

In this article we looked at the two aspects of purchasing new furniture. We examined the responsibilities of what we should do with the older furniture. In the way of donating it, recycling it, giving it away or selling it. Doing these things allows our older furniture to be recycled and re-used creating a positive environmental impact. When getting ready to find new furniture we explored alternatives to domestic woods in the way of bamboo. Bamboo is fast growing, can be reseeded in less than three months after harvesting and provides material even harder than maple. Bamboo is a positive resource for eco-friendly furniture and if it is an available option should be considered ahead of other products. These suggested practices are not only good for you and others but for our environment as well.